• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

Whether you're replacing your handles or need to add extra security, you'll choose the perfect handle for your door. Upvc handles are simple to install and meet the required 92mm centres of multipoint locks.

The backplate's fixing centre as well as the keyhole/lever dimensions are the most important measurements. Compare these measurements to your current marks before making a purchase.

Lever/Pad

Lever pad handles for doors consist of the lever handle on one side and a paddle shaped handle on the other. These are designed to work with key wind locks, although they can also be used to split spindle multipoint door locks (though you'll need an additional dual spindle lock case).

After you have picked the appropriate handle for the doors, the finishes will be listed in the drop-down menu. Some styles of handles are not available in all finishes. Always examine the technical drawing and dimensions sections for the particular item you are looking to ensure that you get the right fit and size.

It is important that when selecting the new set of upvc lever pad handles, they are in line with the PZ (distance from the spindle of the handle to the middle of the hole of the cylinder) of your multipoint door locks. This is because these must be lined up to ensure that doors stay locked, regardless of whether you are looking at them from the inside or from the outside. Our handles are designed to fit a wide range of conventional cylinders, but it is a good idea to double-check prior to purchasing.

You'll need to remove your handles that you have already installed and then dismantle the lock case if you are upgrading to dual spindle levers for your handle as this will require an additional split inline cylinder. You can purchase these separately. We have included a technical illustration in the images of each product.

It is a good idea to loosen the screws that hold the door handle you have and then check the mechanism. If the screws aren't loose enough it is possible to loosen them further. After that, you can take the spindle from the patio door handle locks handle and replace it with your new upvc door locks and handles handle. It is important to ensure that the handle is in the proper position prior to fixing it. You can do this by placing your finger between the frame, and the handle, to ensure that it is level.

Lever/Lever

The lever handles on doors are used to operate a multi-point lock with the Euro cylinder. They can be found on a variety of double upvc doors, as well as on some wooden and aluminium doors. They feature an inside lever and a paddle on the outside and are usually supplied in two types. Sprung - These have a spring cassette installed within the backplate that helps to bring the handle lever into a horizontal position. Non-sprung - they do not have a spring mechanism and must be manually pulled to raise the handle lever to a horizontal position.

To repair the door handle lever that is sliding you'll need to locate the detent access pin or hole. It's typically an insignificant hole or protruding ring, or rectangle, located on the handle base plate. Once you have located the hole for accessing the detent or pin, you can remove it using the help of a screwdriver.

After the handle is positioned horizontally, you can reinstall the screws. Close them to ensure that the handle stays connected to the base plate. You should also consider applying an adhesive that locks the screw threads to increase the grip and stop them from loosening over time.

Drooping lever handles on door handles could be the result of many factors. The most common reason is that the fixings have been over tightened, and are putting pressure on the bearings that are causing it to bind against the door's surface. It could also be that the levers haven't been adjusted at the right angle, which compresses the latch mechanism and stops it from fully springing into action.

A common cause of spring levers that are not functioning properly is that the spring is not being in the proper position on the backplate. The easiest way to test this is to turn the handle to check if it returns to the horizontal position.

If your door handles are loose, it is important to identify the problem quickly, as this can lead to excessive wear on the screws and eventually to the handle falling off the base plate. It is also a good idea to tighten all screws that are loose regularly in order to prevent them from becoming loose.

Lever/Snib

These handles made of upvc are also known as 'Snib' handle for patio door sets and have a snib button at the top of the lever that can be pressed down to lock your door if you don't use the dummy lock. They are typically fitted with a Fullex 68PZ (that's 68mm between the spindle's centre and the lever or lock centre) door lock. We also stock a variety of other door handles with 68PZ from manufacturers like Ferco and Fab & Fix.

Changing your door handle is a cheap option to modernize your home, whether you're replacing existing handles or fitting new ones to doors you've constructed in your home. There are many styles of door handles made from upvc available with traditional levers on backplate, straight or curving short latch and dummy knob handles for multi point locks, which are perfect for French doors.

Rose door handles are circular or oval-shaped versions of lever-on-backplate handles. These kinds of door handles have a lever or knob on a backplate, which sits behind the lever or knob and is sometimes referred to as the rosette, however some back plates can be detached to be concealed for fixing.

These handles are available in various finishes, including coloured and chrome finishes, to complement your door and other hardware such as knobs, hinges and bolts. Some handles are supplied with grub screws, which help firmly attach the knob or lever to the spindle. Some handles are equipped with bathroom spindles, which can be used for bathroom locks. They also come with a thumbturn release mechanism and can be used on bathroom doors.

Mortise

If your uPVC front door handle is stuck in the open position, the reason will most likely be with the tubular latch. It could be due to many things however the most frequent is the lack of lubrication on the latch plate. This can be fixed quite quickly by opening the door and spraying lubricant onto the lock and handle. It could also be that the latch has slipped away from the backplate. This could be more of a problem and will require a specialist to repair.

A multipoint door handle is an ideal solution to the problem of a door handle that is stuck. These handles are attached to the faceplate, and are operated with either a thumb turn or key knob that activates the cam that locks the deadbolt. The handles are available in a variety of sizes to fit different kinds of uPVC door and in a variety of attractive finishes that match existing hardware. These handles can be purchased online or through a local locksmith and are simple to install, with clear instructions.

You will need to know the PZ size of your cylinder in order to select the right replacement handle set. This is the distance in millimetres that lies between the outer edge of the door frame and the center of the hole for the handle. You'll also require the type of lock for your door, whether it's a mortise or hook lock. The most efficient way to locate the correct handles once you know the measurements is to use the filter for brands on the website. This will narrow down your options, and you will then select the correct size from there.

A typical handle set comprises an arm with two screws of various lengths, drill guides and installation instructions. The smart versions, such as the Igloohome Smart Mortise 2+ includes the complete mortice lock, which has built-in keypad. These are more complex devices and are best suited for professionals who install them or skilled DIYers. Certain handle sets come with various accessories, like weather strips, which can be used to improve the appearance of the door.