• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru car Keys Key Fob at Home

It is possible that you need the key fob to be programmed by an automotive locksmith or Subaru dealer, depending on how old your Subaru is. This is usually accomplished by connecting a programming machine to the computer in the car.

To program your subaru spare key begin by opening the driver's door using the door button control, and then close it. You will hear the chime sound and see the dome lights flashing in the instrument panel.

Step 1: Find the circuit board for your transmitter

There are many ways to program your keyfob. First, you need to be aware of what kind of key fob you have. This can be done by looking at the shape of the key fob, or by listening to the chime in your car.

Once you have the necessary information, you can begin the process of programming your key fob from home. You will need an aluminum flathead and a key to do this. You can open the key fob by twisting. Then push the metal key in and pull the battery from the tiny tabs that secure it. Replace the battery with a new one and put the key fob case back together.

Step 2: Remove the key fob case

Change the battery is a good idea because it could revive key fobs that aren't working for a while. In some instances the buttons on the key fob may be broken. If you see that the contacts made of metal on the button are loose try soldering them back in place again in order to make them function properly.

Make sure you turn off your ignition and close your doors prior to you begin. Close the driver's side doors and press your door button 10 times in rapid succession. Then, you should hear the instrument panel chime and your dome lights should flash. This means you're ready to move on.

Step 3: Insert the Key Fob in the ignition

There are a lot of articles online that give you steps on how to program a new or replacement Subaru key fob at home, but they are not precise. Reprogramming an electronic lock is best done by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with all doors shut and the engine turned off. Open the door button control and use it to unlock all doors. Open and close the driver's doors two more times. Inject and remove the ignition key (don't turn it) 10 times in 40 seconds. The system will vibrate when the settings are changed.

Step 4: Turn the Ignition On.

Before proceeding with this method of key fob programming it is important to note that this process only works with a functioning key already. If not, then a dealership or auto locksmith will be required to program a new key for your subaru outback key fob in Fort Bliss.

Once your key has been programmed it should be able to start your car in around five minutes. Begin by closing all doors and shutting off the engine. Next, get in the driver's seat and unlock all doors with the door button control. Put the key in the ignition and turn it on to the first position (the electrical systems will turn on, but the engine remains off) then return to the off position 10 times in rapid succession.

Step 5 5. Unlock the Door of the Driver's Door

Subaru offers a variety of high-end cars with key fobs which lock and unlock doors, turn on the engine, and even defrost windows. However, at times, these devices aren't working as they should.

Call a locksmith dealer to fix the problem. This will resolve the issue and ensure your vehicle is secure.

You must first open and close the door on the driver's side. Then, you need to place the ignition key in and change it to the off position. Then, it should be returned to the off position. Repeat this 10 times in the row as fast as you can. After the tenth time you will hear a chime.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

The process to replace the battery on the Subaru remote key fob is simple. The fob's case on the outside is opened. Make use of a flathead to pry the case's interior open and remove the batteries that were in there.

After removing the old battery, put in the new one and close the case. Then, get in the driver's chair and unlock all the doors using the door button control. Place the key in ignition and turn it so that the electrical system is switched on, but the engine is off. Repeat this ten times in a row until you hear the chime coming from the instrument panel. This puts the system in programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

For some people, the annoying sound that is heard when locking and unlocking the subaru forester replacement key fob key fob from outside the vehicle could become distracting. In some instances, the chirp can be turned off by closing and opening all doors and a double click of the lock button on the key fob.

Switch the ignition off and shut all doors as well as the lid for the fuel-filler. For 10 seconds, press and hold the lock button on the key fob. After that the instrument panel emits an audible chime. The chime signals that the door and fuel-filler lid are locked. It is possible to alter the setting to make the doors lock automatically and without pressing a button.

Step 8 Step 8: Enter the 8-Digit Transmitter Number

Write down the first series of 8-digits and keep it handy. Now, sit in your driver's seat, shut all doors and turn the key to the first position (towards on). After 10 turns, the instrument panel should chime for a single time.

Next, open the case for the key fob and look for the circuit board of the transmitter inside. The circuit board should have one or two 8-digit numbers. Note the first number sequence, and follow the instructions in this guide to register the code with the system of your vehicle. For older models, this procedure may require a visit to the dealer.