• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to increase the security of your home without sacrificing aesthetics choose sash lock door handles. They can be used with mortice latches or sash lock, and can be combined with a night latch to add locking for internal doors.

These handles consist of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can be paired with the tube latch.

Lever Lock Handles

There are many different types of lever door handles available to match the decor of your home. The rustic lever locks are very popular in both farmhouse and modern homes. Classic lever handles are round or spherical and easy to hold. They are simple, affordable and can be used with any type of home decor. For a stylish appearance, choose polished chrome or a satin nickel handle. These finishes are easy to clean and are durable. Antique bronze and polished Brass are also choices. Many handles feature decorative designs, such as amber worm-eyes or long-horned Cyrstals. Others have the shape of a pin or star built into the bottom of the lever.

To change your lever lock door handles first ensure you have the right screwdriver or a tool to take them apart. Depending on the design and model you may have to use an awl or nail to remove the lever handle. Some lever handles feature tiny holes or a notch at the bottom of the handle which can be used to pull them open.

Once you have the right tool, follow the manufacturer's instructions to take off your old handles. You will need to check the spindle size of the new lever handle. Existing doors might have been morticed for previous latches and locks, which require a specific spindle. Most lever handle manufacturers use the standard door handle spindle.

If you are replacing the handle of a sash lock the old handle should be removed and the tubular latch bolt which is within the door, needs to be removed from the strike plate inside the door frame. The next step is to drill a hole in the door frame, insert the latch bolt through, and connect it to the strike plate inside the door frame.

When installing a new lever door handle, it is essential to know that all ADA (Americans with Disabilities Act) approved handles are designed to be operated with a hand and should not require the user to tighten or twist their wrist. To be in compliance with ADA compliance standards the lever door handle must not be operated using the thumb and finger or even the entire hand.

Sash Lock Handles

The primary purpose of Sash locks is to secure the door by pulling the sashes that move tightly together. This prevents drafts from entering the room and helps maintain the temperature of the home's interior, thereby reducing energy costs throughout the year. They also work well for doors that do not require the security of the keyed locking system.

Sash locks are sometimes called mortice sashlocks. They incorporate a latch and dead bolt into one case fitted in the material of the door. They work with a pair of door handles and there are a myriad of different options to choose from to match your home.

Lever lock handle is a lever mounted on the backplate, which is cut off below, which allows the use of a key to operate the mortice sash lock. This lock is usually used on doors that do not lock, like those found in dining and living rooms. However, it is also possible to use with a tubular lock to create the security of the door.

These are designed to hold the sash together at multiple points, and feature a hook that fits inside the keeper. They're available in different styles and designs to fit into various window types, such as sliding or hinged casement window sash windows. Some are made of cast aluminium while others are made of brass or wrought iron. These are available in different finishes to match other elements of door furniture like escutcheons to secure the keyhole.

3 lever sash window repairs locks are suitable for doors that are internal however they are not suitable for external doors since they don't provide the level of security required by insurance providers. They also are less vulnerable to forced entry than their 5 lever equivalents, making them more vulnerable to attack.

A door sash with five levers is the best choice for exterior doors. It provides higher levels of resistance to forced entry and is more difficult to pick or bypass. The locks are a revolutionary design that has been tested and approved for compliance with stringent building regulations, fire and disability.

To replace a sash-lock handle take the old fastener from both ends by removing the screws. Make sure you have a screwdriver in your bag and carefully separating the pieces to ensure that there is no damage. Use a pencil to mark where the screw holes are to ensure that you place the new sash windows fastener properly when it comes time to install. Get rid of any dust or paint flecks, then screw in the new fastener. It is essential to test the handle to make sure it operates correctly and creates a tight seal.

Tubular Latch Handles

The tubular latch is an internal latch that is operated by turning the handle. It is designed to shut a door but it doesn't lock it like a mortice. They are used most often on doors that are internal, and in which locking is not needed. They can be equipped with knob handles or levers.

There are many sizes of tubular latches available. They range from the cheapest to top-of-the-line architectural quality. The dimensions of the door depend on its purpose and whether it is equipped with an lock. For instance bathrooms may need to have an open and thumbturn mechanism in case in an emergency, therefore you'll require a lockable latch.

The selection of the correct latch depends on the backset dimension of your door. You will need to choose the latch with an backset measurement that is in line with the distance between the edge and the centre of your door's opening for the handle rose/knob. This will ensure that the handle/door knobs are able to operate the latch with ease.

If you are fitting a sprung or unsprung door knob or lever, it is essential to choose a sturdy tubular latch that has a double-sprung follower and tongue. This will ensure a smooth and consistent latch action and stop it from becoming sluggish or ineffective after prolonged use.

Once you have selected the correct latch for your requirements the next step is to fit it on the door. The first step is to make sure that the latch is aligned with the top of the door frame/casing. Then mark the location of the plate and drill holes. Using a countersink drill bit will aid in creating the right recess to sit comfortably in.

Once the latch is in place after which you can attach it to the door. It is crucial to ensure whether it's working properly before putting in your door handles and installing your locks, so be sure to test it by opening and closing the door several times. If it's not working correctly Try lubricating the door with WD40. Then try it again. If you are still experiencing problems, it may be necessary to contact an expert locksmith or installer.

Keyhole Handles

Keyhole handles function with a tubular latch fitted to the door to open and close it. The handle is able to engage the latch when pushed down and then releases it when pulled up. They are typically fitted on doors in the interior, such as those in dining and living rooms. However, they can be fitted to front door if paired with the nightlatch.

Door knobs are more modern handles that incorporate a sprung lever/handle with a square or round fixing stem and a thumb-turn or escutcheon. They come in various styles and finishes to match the doors in your home. They can be utilized with Euro cylinder locks or multipoint locking systems to add an additional layer of security to the door. This is accomplished by locking the door at several points along the height of the door. Door handles that are compatible with the lock must be fitted with the proper size of the lock's center to fit the barrel.

Keyhole escutcheons cover the keyhole that is already in the door to conceal it and give the handle a more stylish appearance. They come in both an open or screw on style and are available in various finishes to match the door handle. A recessed escutcheon, that is affixed to the edge of the door to hide the keyhole further and provide it with a more modern appearance, can also be utilized.

Some of the handles are compatible with Euro-cylinder locks. These handles are suitable for uPVC door and require compatible handles with a Euro cylinder hole and screw holes in the backplate. These handles will also require a Euro Cylinder escutcheon, or a standard escutcheon based on the use.

When choosing mortice lock or a sash lock, or a tubular latch for your door, it's important to be aware of the different characteristics of each and the requirements they must meet to work with other components of your uPVC door system. You'll need to consider the door thickness as well as the door hinges and frame reinforcements, as well as the backplate of the door handle size, lock centre dimensions and the screw centres for the cylinder.