• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Lock Ignition Locked?

There are a variety of reasons your car ignition may be locked. The key might be dirty or has a broken wafer inside it. You can fix this by sliding the key in and out of the cylinder many times.

Another possibility is that the pins in the lock cylinder are stuck. You can employ a small tackhammer to lightly tap on the cylinder to loosen them.

Check the Battery

If the car is in Park or neutral but it doesn't turn on when the key is inserted into the ignition, there could be a problem with the shifter switch for the transmission. You can fix it by shifting the gear shifter up or downward to get the car into the correct gear.

If it is still not turning, the problem may be with the neutral safety switch or the transmission shifter cable. This can be easily solved by a mechanic or a local automotive locksmith.

The ignition cylinder may also wear out. Over time, both the ignition and key can wear out and become difficult to remove or insert. A lubricant, such as silicon lock lubricant can help solve this problem by allowing the silicon wafers to slide into place.

The key may become blocked with lint in your pockets, as well as adhesive from tape used to keep packages in place. This can prevent the key from sliding into the ignition. To resolve this issue, you can try cleaning the key with the help of a cloth or an instrument cleaner, like Triflow. It is also recommended to use a spare key to see if the problem is related to the key or the ignition.

You can also tap the key using a small hammer when it's in the ignition. This can cause a small vibration that could cause enough friction to loosen the wafers inside the ignition, allowing them to slide into place. You should be careful not to harm either the ignition cylinder, or the key.

If none of the suggestions above work, you should call a locksmith to check the issue. The key might be broken within the cylinder for ignition or it could be time to replace it altogether. Locksmiths can create a replacement key if the problem is with the key. If the cylinder in the ignition is the problem then you'll need to bring the vehicle to a repair shop for it to be replaced. Luckily, these issues are generally easy to repair.

Check the steering wheel

A simple problem that can prevent the ignition from turning is the steering wheel being locked. This can happen if the driver has a mistake and engages it when they exit or enter the vehicle. It is typically caused by pulling on the wheel and securing themself against it using their hands. It can also happen if a passenger in the rear seat has a mishap and engages the brakes while they get out of the vehicle.

This is a straightforward fix that doesn't require a trip to the mechanic or locksmith. First, make sure that the gear shift is either in Neutral or Park. If it isn't, simply push or pull the shifter slowly until it changes into one of these positions. Also, you should activate the handbrake or press the brake prior to turning the key.

If the wheel isn't locked, a quick look at the steering column will tell whether the key is engaged with the lock. This is typically marked by does a new ignition switch require a new key tiny "Lock" label in the lower area of the ignition circle. This can be easily disengaged by gently jiggling the lock or pulling on it with moderate force. It is important not to apply excessive force since this could cause damage to the key or cut off a wafer within the lock cylinder.

Another thing to try is to use an additional key to determine if it can disengage the lock. This could indicate that the key is worn out and is no longer able to engage the wafers within the lock cylinder. If this is the situation, a professional at Karl Chevrolet Webster City will be able to create an appropriate replacement key.

If the new key isn't engaging, a quick spray of oil that penetrates can assist. Apply a small amount penetrating oil to the keyhole and ignition. Then, jiggle it or tap it lightly to activate it. If this isn't working, you'll probably need to visit a specialist at your local dealership for cars. They will be able to give you a new key, and will also replace the ignition cylinder, if necessary.

Check the Key

If you're unable to get your key to turn on the ignition, it is possible that there is a problem with your key. You can remove any foreign material (lint from packing tape or adhesive) from the key. It is also possible to rub alcohol or Goo Gone on the key to see if this aids.

It's possible that the lock pins inside aren't working properly when you insert the key. You can test a spare key by gently removing it of the ignition after you put it in. This should allow you to be able to feel and hear if internal lock pins move, as they ought to. If not, you could lubricate the pins with graphite powder. You can purchase graphite in small tubes that can be put into the keyhole. This will assist the pins slide into position when you insert the key and prevent them from becoming stuck.

It is possible that your key has damaged or worn out and isn't able to work with the pins within the ignition cylinder. This could cause the ignition cylinder to not turn, which will prevent you from starting your car. If this happens you'll need take your car to an auto locksmith or repair shop for service.

If you're able to turn the car using a spare key, and you've cleared the issue with the steering wheel or battery it could be because the ignition cylinder is worn out. It is possible to loosen the lock cylinder by using the blunt end of a screwdriver, or the handle of the Hammer (not the head). Sometimes, gently tapping the cylinder can free it to allow you to turn your car key. If this is not working it is necessary to replace the lock cylinder by a mechanic.

Check the Ignition Socket

The ignition socket is the place where your key is inserted and removed when you insert it. Often times, it gets covered in debris or is a result of regular wear and wear and tear. You can try squirting some silicon lock lubricant (like WD-40) into the ignition to help things move forward.

You can also employ a small hammer and gently tap the inside of the ignition cylinder in an effort to loosen or reset the pins that could be out of alignment. Be very cautious not to overdo this or you could cause major damage to the ignition switch.

It is crucial to confirm that your car's gearbox is set to park or neutral before you attempt this. A lot of newer vehicles come with an electronic system that locks the steering wheel if it is not in neutral or park. This can prevent the ignition key from being turned.

If you've tried all of these steps but your key is still unable to turn, it could be that the ignition housing has to be replaced. It is important to note that different vehicles will require different procedures for replacing the ignition cylinder.

Generally speaking, this involves removal of the plastic cover which is placed over the steering column and ignition assembly. To remove it, you'll have to adjust the tilt-wheel in its lowest position. Then, remove any fasteners that hold it in place.

Once the cover is removed, you'll need to remove the old ignition cylinder off the steering column. Then, you will need to compare the new ignition cylinder you purchased with the one that was removed to confirm that they are the same. Following this step is completed, you can install the new ignition cylinder in the same manner that you did with the old one.

It is possible that even with our best efforts, the ignition could be damaged and need to be replaced. If this happens, it's advised to contact Tempe Locksmith Tempe Locksmith for assistance. A locksmith can assist you select the best replacement and then install it properly so that your car can begin again.