• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

upvc window repair windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. However If you have double-pane windows that are anchored by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to try to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the gap is large, you might be interested in the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of problems including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it could be due to the handle mechanism getting worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test fit. The corner joints of the sash should align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is crucial to take action if awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the problem the caulking used previously may need to be removed before a new layer can be applied. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The mold thrives in damp environments and can quickly spread across the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze It could be the hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler when you have a person to help hold the frame in place.

Check that the uPVC hinges open and close in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a picture via our website will often resolve the problem. We are always happy to provide suggestions.

It is also crucial to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. Firstly the hinges, again because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. If they're beyond repair, it could be necessary to get them re-aligned. In addition, the interlock could also become unbalanced. This is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace these.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric filled with some sort of filler and can be put on the windowsill on top. They can keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come a point where it is more economical to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.