• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

As it relates to painting molding trim on a wooden-structure house, most people opt to remove it using harsh solvents, or by using scrapers, which takes time and might damage the moldings.
Yet, there exists a simpler approach that maintains the moulding and needs tools and manual labor.

Just before you start to painting your moulding, select an appropriate type of paint. Mouldings paint intended for trim work are advisable since these paints are typically low in low-VOCs, покрасить комнаты в доме hold strongly to surfaces, and dry quickly.
Furthermore essential to pick a paint that is suitable the sheen you desire for your molding.

To prepare the molding for painting, initiate with dusting it completely with a soft-firmly held broom.
In any stubborn grime, gently wipe the area on a clean rag dampened using water but make sure not to moisten the molding.
Allow the surface to completely dry.

Protect the surrounding areas including the flooring and walls through a high-standard matting.
Utilizing painter's tape to seal the edges is also great idea to prevent the paint from seeping.
Yet, ensure that the film are pressed firmly onto the molding to avoid paint seepage behind it.

When you've completed the preparation the area, apply a layer of primer to your molding, if necessary.
The primer helps create an even surface for coating application.
Utilize a high-standard primer that's specifically designed for trim work and let it follow the manufacturer's instructions to the supplier's guidelines.

It's now the time to paint your moldings using a high-quality brush or roller.
While painting with a brush, position at about a 45-degree direction.
Work from the top down to stop drips, and attempt to apply smooth strokes to stop paint deposit on the moldings.
If you choose a roller, use an extension pole to access hard-to-reach areas.
Apply thin coats to prevent drips.

Achieve a finish, let each coat dry to dry according to the supplier's guidelines before applying another coat.
This may take several hours dependent on the type of paint applied in.
If you desire a high-gloss finish, add a coat of coating once the coating is obtained.

When you are finished painting, delicately remove the masking tape by not pulling off the coating by gently peeling the film back and submerging the edges with a damped cloth in case paint is still attached to the film.

In summary, painting molding leaving it from a wooden house requires some effort but gives you the outcome you want without any mess and damage.