• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

Find the perfect handle for your victorian door handle, whether replacing your existing handles or adding security. Upvc handles are simple to fit and comply with the required 92mm centres of multipoint locks.

The most important measurements to take into consideration are backplate fixing centres and lever/key hole dimensions. Check these carefully against your current measurements prior to ordering.

Lever/Pad

Lever pad handles for doors consist of a lever handle on one side and a paddle-shaped handle on the other. These are designed to be used with key wind locks although they can also be adapted to multipoint split spindle door locks (though you'll need an additional dual spindle lock case).

Our range of upvc handle lever pads are available in a wide range of finishes. They will be displayed in the drop-down list once you have found the correct handle for your doors. Not all styles of window handles are available in every finish though and you should always look over the technical drawings and sizes sections for the specific product you want to make sure that you get the correct size and fit.

When choosing the new set of lever pad door handles made of upvc handle window, it is essential to ensure that they match the PZ (distance between the spindle of the handle and the center of the hole for the cylinder) of your current multipoint door locks, since they have to be in line to ensure that the doors remain locked, whether from the inside or the outside. Our handles are designed to fit most conventional cylinders, but it is important to double-check before ordering.

If you want to upgrade to dual spindle levers, you'll need to remove the handles that are currently in use and then take apart the lock case. This will require an additional split cylinder inline. These are available separately and we offer an entire technical diagram for you to look at in the images for each product.

Once you have removed the screws that are holding your existing door handle it is an ideal idea to loosen them and examine the mechanism to determine how it's performing. If the screws aren't loose enough then you might need to loosen them even more. After that, you can take the spindle from the handle and replace it with your new upvc handle. Before putting the handle in place it is a good idea to ensure that it is in the correct place. You can do this by inserting your finger in the space between the door frame and the handle to make sure that it is level.

Lever/Lever

Lever door handles are an a multi-point lock using the Euro cylinder. They are found on the majority of double doors made of upvc, aluminum doors and a few wooden doors. They have an inside lever and a paddle on the outside and are typically available in two varieties. Sprung - these come with a spring cassette within the backplate that helps move the handle lever to a horizontal position. Non-sprung - they do not have a spring mechanism, and must be manually pulled to raise the handle lever back to its horizontal position.

To fix the door handle of a lever that is sagging, you will need to find the hole for access to the detent or pin, which is typically a small round or rectangle shape hole or protruding pin located on one side of the handle base plate. Once you have located it, loosen the set screw using a screwdriver and remove it to release the lever, allowing it to return to the horizontal position.

Once the handle is positioned horizontally, you can install the screws. Close them to ensure that the handle is securely fixed to the base plate. Consider applying a threadlocking solution to the threads of the screw to increase grip and prevent them from loosening over time.

Lever door handles that droop could be the result of a number of factors. The most frequent reason is that the fixings have been too tightened, and are putting pressure on the bearings that are causing it to bind against the door's surface. It could also be due to the fact that the levers are not being operated in a straight line and this is causing compression of the latch mechanism and preventing it from fully springing back into service.

The most common reason for a sprung lever not working properly is the spring not being in the proper position on the backplate. The simplest way to check this is to move the handle to check if it returns to the horizontal position.

If the door handles aren't tight, it is crucial to find the issue quickly, since this could lead to excessive wear on the screws, and even to the handle falling off the base plate. It is also a good idea to tighten all screws that are loose regularly in order to prevent them from becoming loose.

Lever/Snib

The handles for doors made of upvc are also referred to as 'Snib' handles and have a snib button on the top of the lever that you can push down to lock your door if you don't have an dummy lock. They are usually fitted with a Fullex 68PZ (that's 68mm between the spindle's center and lever or the lock centre) door lock. We also have a selection of 68PZ door handle from manufacturers such as Ferco and Fab & Fix.

You can make your home more modern by changing your door handles regardless of whether you're replacing the handles on your existing ones or installing new ones on doors that you have built. There are various styles available for upvc door handles, including the classic levers on backplates. Other options include curved or straight short latches, as well as Dummy knobs for multi-point locks. These are perfect for French doors.

Lever on backplate handles are often rectangular, but you can also find circular or oval shaped versions that are referred to as rose door handles. These handles for doors are identified by a lever or a knob that is mounted on a backplate. The backplate is removable for hidden fixing.

The handles are available in a variety of finishes including coloured and chrome finishes, to match your door and other hardware like knobs, hinges, and bolts. Some handles come with screws that grub the lever or knob firmly to the spindle. Some handles come with bathroom spindles, which are suitable for bathroom locks. They also have a thumbturn release mechanism, and can be used on doors for bathrooms.

Mortise

If your uPVC front door handle is stuck in the open position, the reason is likely to be due to the tubular latch. There may be a few reasons for this, one of which is the simple lack of lubrication on the latch plate. It is possible to fix this problem by opening the door, spraying lubricant onto the lock and handle. Or, it could be that the latch plate is detached from the backplate. This can be a bit more complicated and will require a specialist to fix it.

A multipoint door handle is the ideal solution to the problem of a door handle that is stuck. These handles are mounted through the faceplate and are operated by either a thumb turn or key knob that triggers the cam that locks the deadbolt. The handles come in different sizes to suit different types of uPVC door and in a variety of attractive finishes that are compatible with existing hardware. The handles for double glazed doors are available via the internet or at a local locksmith. They are simple to install and come with clear directions.

To select a replacement Double Glazing handles handle set, you'll have to know the PZ size of the cylinder. This is the distance in millimetres that lies between the outer edge of the door frame and the center of the handle hole. You will also need the type of lock that is installed on your door, irrespective of whether it's a mortise lock or a hook lock. Once you know these measurements, the most efficient way to find the correct handles is to search by brand option on the website. This will help narrow down your options and then you'll be able to select the appropriate size.

A typical handle set comes with the handle, a pair of different length screws, drill guides and installation instructions. The smart models, like the Igloohome Smart Mortise 2+ includes a complete mortice lock with built-in keypad. These are more sophisticated devices that are for professional installers or highly skilled DIYers. Some handle sets have various additional accessories, such as weather strips, which can be used to enhance the look of the door.