• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you want to enhance the security of your home without compromising aesthetics choose sash lock door handles. They can be used in conjunction with a mortice lock or sash lock, and can also be combined with a nigh latch to provide extra locking for internal door.

The handles consist of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can be combined with the tube latch.

Lever Lock Handles

There are many types of lever handles to match any decor. The rustic lever locks are very popular in both modern and farmhouse-style homes. Classic lever handles are either round or spherical and easy to hold. They are simple, affordable and fit in with any style of home decor. To create a chic style, choose polished chrome or a satin nickel handle. These finishes are durable and easy to clean. Other choices include antique bronze and polished brass. Many handles feature decorative designs, like amber worm-eyes or long-horned Cyrstals. Others feature a star or pin shape molded into the bottom of the lever.

To change the lever lock door handles, first make sure you have the correct screwdriver or tool to remove them. Based on the design and model, you may need to employ an awl, or nail to remove the lever handle. Some lever handles come with tiny holes or a notch at the base of the handle that can be used to pry them open.

Follow the manufacturer's instructions to remove your old handles after you have the proper tool. You will need to check the size of the spindle of the new lever handle. Existing doors could have been morticed to accommodate previous latches and locks, which require a specific spindle. Most lever handle manufacturers have an established door handle spindle size.

If you are replacing the handle on a door with a sash lock the old handle should be removed and the tubular latch bolt, which is inside the door, must be disconnected from the strike plate inside the door frame. You will then need to drill a hole into the door frame, then insert the latch bolt into it, and connect it to the strike plate inside the door frame.

It is important to remember that when installing a new lever handle, all handles that comply with the ADA (Americans with Disabilities Act), are designed to be operated by hand. The user should not be required to grip tightly or twist their wrist. To meet ADA standards of compliance, the lever door handle must not be operated using only fingers and thumbs, or even the entire hand.

wooden sash windows Lock Handles

The main function of door handles for sash locks is to pull the sashes moving together to form a seal. This stops drafts from entering the room and also helps maintain the temperature of the home's interior, thereby reducing energy costs throughout the year. They are also great for doors that do not require the security of a keyed locking system.

Mortice sashlocks can be described as sash locks that combine a deadbolt and latch into one case. They are inserted into the door's materials. They are used in conjunction with a set of door handles and come in a variety of options.

Lever lock handle operates with a lever on a backplate cut out below, which allows a key to be inserted to open the mortice sash lock. This lock is most commonly used on non-locking interior doors like those found in dining and living rooms. However, it is also possible to use with a tubular lock for the security of the door.

These are designed to hold sash together multiple times, and have hooks that fit into the keeper. They're available in different styles and designs to fit into various window types, such as sliding or hinged casement windows. Some are made from cast aluminium, others from brass and even wrought iron. These are available in various colors to match other components of door furniture, like escutcheons to secure the keyhole.

The 3 lever sash locks are only suitable for internal doors. They do not provide the level of security required by insurance companies. They also have a lower resistance to forced entry, making them more vulnerable than their certificated 5 lever counterparts.

A door sash lock that has five levers is a better choice for doors that are outside, as it offers higher levels of resistance to forced entry and is harder to pick or bypass. These locks have an enhanced design that has been tested and certified to comply with the strictest security, fire and disability regulations.

To replace a handle on a sash-lock remove the old fastener from both ends by taking off the screws. Make sure you have a screwdriver handy, and carefully separate the pieces to ensure that there is no damage. Mark the screw holes with a pencil to ensure that you ensure that the new fastener is properly aligned when you are ready to put it in place it. Get rid of any dust or paint flecks, then screw into the new fastener. Test the handle to ensure it works correctly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which is located inside a door, and is operated by turning the handle. It is designed to latch a door shut but it doesn't secure it like mortices. These are most often used on doors that are internal and there is no need for locking. They can be equipped with knob or lever handles.

There are various sizes of tubular latch available. The sizes range from low-cost to the luxurious architectural. The size of the door is contingent on its purpose and whether it is equipped with a lock. For example, a bathroom door may require an open and thumbturn mechanism in the event of emergency, so you will need locks that are lockable.

The backset of your door will also determine the latch you select. You will need to choose one that has a backset measurement that is equal to the distance between the edge and the center of your door's hole for the handle rose/knob. This will ensure that the door handle and knobs will operate the latch smoothly.

If you are fitting an unsprung or sprung lever or door knob then it is important to choose a sturdy tubular latch that has a wooden double glazed sash windows-sprung follower and tongue. This will give an effortless operation for the latch and prevent it from becoming sluggish or unresponsive with regular use.

Once you've selected the right latch to meet your needs The next step is to fit it onto the door. The first step is to ensure that the latch is level with the top of the door frame/casing. Mark the position of the plate and drill holes. Using a countersink drill bit will help to create the correct recess for it to fit comfortably into.

After the latch has been installed, you can install it into the door. Before installing your door handles or locks it is essential to make sure that the latch is working correctly. To check this, open and close the door a few times. If it is not functioning correctly, try lubricating it using WD40 and then attempting it. If you are still experiencing problems, it may be necessary to talk to a locksmith or a professional installer.

Keyhole Handles

Keyhole handles function with the tubular latch placed inside the door to open and close it. When pushed down, the handle engages the latch and when pulled up, it opens the door to be opened. These handles are usually used on interior doors like those in dining and living rooms. However they can also be affixed to front doors if they are coupled with the nightlatch.

Door knobs are more modern handles that combine spring levers/handles with an oval or round fixing stem, and a matching thumb-turn or escutcheon. They come in a wide range of styles and finishes to match different doors in the home. They can be used with Euro cylinder locks or multipoint locking systems that provide extra security to your door. This is achieved through several points of locking along the door's height. It requires compatible door handles with the proper lock centre size to fit the barrel of the cylinder.

A keyhole escutcheon is a cover for the door's existing keyhole that hides it from view and provide an elegant appearance to the handle. They can be purchased as an open-top or screw-on style, and in a variety finishes to match your door handle. Alternatively, a recessed escutcheon can be fitted to the door's edge to hide the keyhole and provide a more modern appearance.

The majority of the handles mentioned above are designed to work with a mortice or sash window repairs lock mechanism, however, some of them are compatible with Euro cylinder locks as well. These are used on upvc sash windows doors and require door handles that have a Euro cylinder cutout and suitable screw holes in the backplate to accommodate the euro cylinder. These handles may also require an escutcheon for Euro-cylinders or a standard escutcheon, depending on the application.

When choosing mortice lock, sash lock or tubular latch for your door, it's important to know the distinct features of each and the requirements they have for compatibility with the other components of your uPVC door system. You'll need to take into account the door thickness as well as the hinges for your door as well as the frame reinforcements. the size of the backplate for the handle, the lock's central dimensions and the screw centres on the cylinder.