• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Wood Burning Fires Need to Be Hot and Clean

The warmth and ambience of a wood-burning fireplace is not only soothing and mesmerizing but also essential to our health and well-being. But, they have to be hot and clean for them to function properly.

Green, or unseasoned, wood has high moisture content that makes it challenging to light and burn efficiently. The seasoned, or kiln dried wood has low moisture content and is easier to ignite and keep burning.

Efficient Combustion

The cheap wood burning stoves fire must be hot enough to snuff out moisture and reach temperatures over 540 degrees F. 900 degrees F in ideal conditions) where the heat-producing secondary combustion process starts. This is the most important step in efficient combustion of the fuel and reducing pollutants smoke, creosote, and buildup in the flue.

It is crucial to understand that the temperature required for secondary combustion is contingent on the type of fuel and the conditions around it. The best way to limit the variation is to use seasoned firewood with less than 20%.

In addition, the quantity of air that is pumped into a fire can significantly impact its heat output and burn time. The more oxygen that is available, the faster the fire will burn. A wood fire produces less energy and burn at a slower rate when the air supply is slowed.

A fireplace or wood stove insert that has an adjustable air damper can increase the burn time and efficiency. A wide open setting allows the fire to consume all oxygen available and will quickly exhaust the fuel that is usable. A fire that is contained in an area of limited size is less likely to spread.

A firewood pile that has been properly dried is crucial for efficient wood burning. Wood that is freshly cut and isn't dried will have a high water content, making it difficult to burn. It is recommended to only use seasoned firewood that has been stored outdoors for six to nine months for the best performance.

Another consideration is the BTU content of different types of wood. For example white pine or spruce trees might be cheaper than eastern hardwoods, such as black locust or shagbark, however the BTU values of the latter are higher, which means they provide more heat for the same amount of wood burned. This is why it's crucial to think about your heating needs and fuel costs when selecting your firewood.

Clean Burning

Wood smoke can trigger indoor air pollutants, which can irritate lungs and cause respiratory distress in seniors and children. These pollutants include volatile aromatic hydrocarbons (PAHs) like benzo-a pyrene and formaldehyde and volatile organic compounds such as benzene. Volatile Tars (such as creosote) are also released when firewood burns.

Smoke from old, poorly-designed fireplaces and wood stoves could contribute to poor outdoor air quality, making it harder to see and contributing to photochemical pollution. If used properly however modern combustion technology in clean-burning wood stoves and fire places can help reduce the emissions.

Stage 1 - Vaporization of moisture: As the wood heats it releases water vapour, which escapes through the chimney flue. This is more energy-intensive than it would have when the log was dried to dry before burning. This is a waste of energy which could be used to heat your home.

In the flue, the vapors mix with carbon particles to form smoke. Smoke is one of the main sources of particulate matter and smog that is found in the air.

Fireplaces and wood stoves equipped with clean burn technology, if properly used, can greatly reduce this problem by burning the logs to the state of charcoal, which releases far less volatile gasses, and producing the majority of the energy in the log from usable heat.

Avoid using damp, sour or rotten freestanding wood burning stove to light your fire. It's more difficult to burn and generates more creosote. Avoid overburdening the stove with soft and thin woods such as fir or pine. They require more energy to burn and generate more smoke, which can cause chimney fires.

Always wait until the ashes have cool before handling them. Dispose of or store the ashes properly. They can re-ignite when exposed to water, and are hazardous in landfills. Make use of them in your garden or at home instead.

Properly properly storing, seasoning and burning your wood properly will save you money on fuel and will keep your stove working efficiently. Regularly cleaning your chimney is crucial to get rid of creosote, particulates, and other deposited matter. This will also prevent chimney fires as well as keep your chimney operating safely.

Safety

It's hard to beat a warm fire on a chilly winter night However, precautions for safety should be taken. If fires are constructed incorrectly, left unattended or burned and a dangerous gas can be released into the home. Creosote may also build up in the chimney. These deposits can clog up the flue and decrease the flow of air, making your wood stove or furnace not to work as efficiently.

Never burn treated or painted trash in your wood-burning stove fireplace. They release toxic gases and may release toxic fumes like carbon monoxide. Do not use flammable liquids as a fire starter. Kerosene, gasoline and lighter fluid can increase emissions, produce toxic creosote and possibly cause chimney fires.

Keep combustible objects like furniture, curtains, and even toys, at a safe distance from your stove or fireplace. Do not hang clothes on or near your wood burning fireplace (lovewiki.faith). Make sure that children understand that the fire is hot and should not be touched.

Use only seasoned wood for your stove or fireplace. Seasoned wood is dried throughout the summer to reduce the moisture content. Wood that is wet produces more creosote and smoke, however, seasoned logs burn more efficiently and cleanly. Wood Burning Stoves that is seasoned looks darker, has cracks in the end grain, and makes a hollow sound when tapping. Keep your logs outside, neatly stacked with the top partially covered but still allowing air circulation around them.

Be cautious not to over-load your stove or fireplace, as overloaded appliances generate more smoke and produce less heat. Overloaded fires may also produce dangerous levels of carbon monoxide. If you have an older appliance that has a metal liner, check it frequently for signs of wear. This could cause a chimney fire.

The EPA recommends reducing smoke in your home by using dry, split, and well-seasoned wood, and then constructing a warm fire using small pieces. Avoid soft woods such as pine. Pine is a good starter material for a fire, but shouldn't be used for more than. These soft woods are brimming with sap and resin that burns, if burned, will create large amounts of creosote into the chimney.

Maintenance

The warmth of a fireplace that is wood-burning is a great way to enjoy the winter evenings. It is crucial to maintain your fireplace in order to ensure that you reap the maximum enjoyment from your fireplace. Regular cleaning and inspection of your fireplace is the best method to avoid problems that may arise. This prevents creosote buildup and keeps the chimney clear to ensure maximum efficiency.

Creosote, a dark, hard, flammable substance that develops in the flue when wood does not completely burn. If a significant amount of creosote builds up it can cause chimney fires. These are the second most frequent cause of fires in homes across the United States. A number of issues can contribute to a fire's failure to completely burn, including dampers that have not been properly closed and cracks in the chimney liner and an absence of regular cleaning and ash removal.

Incorrectly seasoned wood contributes to the buildup of creosote in excess. Water can make up half of the weight of a wood piece. During the fire the water boils and releases heat, but it also consumes energy during the process. The resulting water vapor is then absorbed as creosote or released into the atmosphere as part of the smoke.

Soot is a different harmful byproduct of burning wood. Soot is less brittle than creosote. However, it can adhere to the walls of your fireplace and impede air circulation. It could also pose an ignition risk since it ignites easily when exposed to combustible gasses.

You should remove the ashes and put them in a metal ash container that you keep outside on a non-flammable surface. The Ash can also be used as a source of nutrients for plants, so don't forget to spread them around the yard!

It is recommended that a Certified Regency Dealer inspect your chimney and fireplace on a regular basis. The technician can check for cracks in the chimney, creosote and soot levels, a properly shut damper, and the condition of your catalyst. If you have a double-stage fireplace with an air tube, you should remove the catalyst and visually checked for blockages. Refer to your user manual for directions on how to accomplish this for the particular unit you have.