• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window repair frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the distance between the door and the window is large, you might prefer an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sagging. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll have to open the window so that you can access the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen. Most often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. The first step is to close the window and perform a test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be put on. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and that the sill pan is angled correctly to drain away from the window repair. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed glass, it is more likely that the issue is more with the seal rather than the frame. It is also possible to be fixed by an uPVC window repair - click to find out more - expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze, it may be hinges at fault. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change a window hinge but it's much simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrows on each hinge, this shows which way the window should open.

The issue could be caused either by opening the window incorrectly or a faulty installation at the factory. This can often be resolved by sending us a picture via our website and we will be pleased to offer you suggestions.

It is also essential to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges can also be misaligned due to wear, creating gaps where the sash meets frame. If they're beyond repair, it might be required to realign them. In addition, the interlock could also become unbalanced. It is located on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace these.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease draughts.

Another, and most effective methods to reduce drafts is to use an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be put on the windowsill on top. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security for your home with regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and there may come a point where it is more efficient to replace them than repair them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.