• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The revolutionary Ghost immobiliser will protect your pride and joy against key-long theft and relay theft. With a unique PIN sequence, unless they know the code your vehicle won't start!

Transport Mode allows you to temporarily disable the device, which is ideal for servicing and transport in vehicles. It then reactivates by entering a PIN again.

No Key Fobs or Indicators with Leds

The ghost immobiliser review 2 immobiliser is a innovation in automotive security technology, offering a robust defence against the latest methods of car theft. Its unrecognizable installation and engine start blocking will reduce the risk of your vehicle being stolen, which can give you peace of mind, and may even save you money on insurance premiums.

It does not emit radio frequency signals, which makes it inaccessible to traditional scanners. It is also not hacked using common methods such as key cloning or signal jamming. The device uses existing buttons on your vehicle such as those on the steering wheel, door panels and the centre console to generate a unique, changeable PIN code sequence that can be up to 20 presses in length. Only the owner of the vehicle is allowed to start the engine when the right sequence or beacon or mobile app is used. This adds an additional layer of security against thieves.

You can also enable an easy service mode when you need to perform tasks like valet parking or servicing, which requires you to temporarily disable your system. This can be accomplished quickly and easily through a mobile app, meaning your vehicle remains safe while being repaired. It is simple to change back to secure mode once the work is completed to ensure your vehicle is secure at all times.

Unlike other aftermarket immobilisers that work with fobs and a fob, the Ghost 2 can be operated directly via the existing buttons, making it far simpler to use than traditional systems. The app can be used as a backup key in the event of an emergency. This lets you drive with your security shut off, without needing to enter a PIN code.

No Radio Frequency Signals

Contrary to traditional security systems which have their own separate remote and remote, the autowatch ghost immobiliser 2 immobiliser doesn't require any additional key fobs and can be used with the buttons on your centre console or steering wheel. The device is unnoticeable by thieves who use the RF scanning technology or code grabbing, meaning your car won't start for them if they manage to steal your key.

The device employs an unique password sequence of buttons that locks the engine. This pin code is entered on the app, or by pressing the buttons on the steering column or the centre console. This lets you also lock the gearbox which means that your car can't be driven away unless you have a key in your possession or are capable of entering your pin code. The device can be set to transport mode, which allows you to drive the vehicle without having to enter your pin code. This will provide extra protection for your vehicle when it is parked at a service or valet park.

The Ghost 11 Immobiliser 2 immobiliser is designed to be a theft deterrent that is as subtle as possible, which makes it an appealing choice for those who've spent an enormous amount of money customising their vehicles or own rare or expensive cars. Many have reported that it is a fantastic way to prevent their cars from being stolen. Many have reported stories of attempted thefts of cars that were stopped by it. The Ghost 2 is also very versatile. Users have reported that it can be used with their regular keys and with the emergency button on their vehicle, providing them with peace-of-mind when they're away from their car.

No Radio Frequency Scanners

Ghost immobilisers protect your vehicle from key copying and theft. The system utilises the buttons inside your vehicle, such as those on your dashboard and steering wheel to create a unique, programmable sequence of buttons that only you can identify. Without this sequence, your car will not start. This combination of an unique disarming sequence as well as the absence of radio frequency signals make the device extremely difficult to attack or to bypass.

The ghost immobiliser and tracker CAN Immobiliser is a better alternative to Thatcham approved devices that rely on radio frequencies scanning. It operates completely silently, without external signals and does not depend on any external signals. It is a safer alternative and ghost immobiliser car is insured if installed by an installer who is TASSA-approved (we are one of them!) ).

Due to the nature of how much is a ghost immobiliser the Ghost immobiliser integrates with your vehicle, it is strongly recommended to have a professional installer carry out its installation. This ensures that it's seamlessly integrated into your vehicle's systems, resulting in optimal performance and a significantly lower chance of failure.

Professional installation is usually with warranties and support to further enhance the value of your purchase. This is a major deterrent for would-be thieves, who are less likely to attempt any attempts at bypassing the device because of the security features and skilled installation.

In addition to being an excellent deterrent against thieves, the Ghost is designed to be user-friendly as well. It can be configured to automatically re-arm itself after a specific period of time, meaning you don't have to remember your PIN code every time you park your car. It offers a Service/Valet mode if you want to leave your car for valet parking or servicing. This can be turned on and disabled using an easy indicator sequence.

No Wire Cutting

The Ghost 2 is non-invasive and doesn't require wire cutting during installation. It connects to the CAN data network of your vehicle and is programmable with a unique PIN code. This will prevent anyone else from starting the engine if they don't have a unique sequence of PINs or app authorization.

The device is also undetectable by the specialised scanning tools which some thieves employ and is silent as it doesn't send out radio signals like other immobilisers. It is weatherproof, sealed, and small enough to be concealed anywhere within the vehicle.

Another advantage of the Ghost II is that it can be turned into 'transport mode' for short periods without the need for an individual PIN sequence. This is ideal for situations like lending the vehicle to someone in the family or a friend or in emergencies which allows you to start your vehicle and drive away quickly and safely.

It's important that you work in a well-lit space when installing the Ghost II. You should wear safety gear when working with electrical components and tools. A basic set of tools can help you make precise connections. A multimeter will allow you to verify electrical values, and ensure that your wiring is safe. Insulation tape and cable tie can be used to cover any wires that are cut or exposed or to join them during installation.

It is also essential to disconnect the battery before trying any wiring work on your vehicle. This will prevent any airbag deployments as well as electrical shocks if the Ghost II is connected to the vehicle's system when the battery is disconnected.

Easy to Install

The autowatch ghost 2 immobiliser immobiliser is an exclusive next-generation device that operates by connecting directly to your vehicle's CAN Data Network and using an individual PIN Code to stop your vehicle from getting started. This makes it much more difficult to break than conventional alarm systems or after market key fobs and offers superior protection against key cloning hacking as well as relay attacks.

The unit can be hidden within your vehicle and utilises the buttons already on your dashboard and steering wheel to generate the sequence you know. This prevents thieves from being able to make use of a key that is cloned to start your vehicle. It can also stop them from using an instrument for diagnosing that is based on hacking the OBD.

Installation is simple and does not require cutting wires. The unit connects to the vehicle's CAN bus system via a continuous 12V supply as well as an earth connection. Basic hand tools are sufficient for the installation process and a multimeter will help in locating the right wires. To protect the connections from damage insulation tape or heat shrink tubes are suggested. Cable ties can also be used to keep the wiring tidy.

Once installed the unit enters a learning mode and records your unique sequences of buttons and sequences to generate your unique pin code. This information is then stored in the CAN data network, making it virtually impossible for anyone else to replicate your sequence and even start your vehicle.

Should you ever forget your PIN Code or sell your car, or a button become inoperative there is an emergency override option known as Transport Mode. This will shut down the Ghost system completely, but it will automatically activate when you reach 31mph for over 15 minutes or when you enter your PIN Code. This is great for those who rent their cars frequently through services like Turo or ZipCar.